Autofocus Laser Cutting Head
Without Manual Focusing
The software automatically adjusts the focusing lens to realize automatic perforating and cutting plates of different thickness. The speed of automatically adjusting focus lens is ten times of the manual adjusting.
Bigger Adjustment Range
Adjustment range -10 mm~ +10mm, precision 0.01mm, suitable for 0 ~ 20mm different types of plates.
Long Service Life
Collimator lens and focus lens both have water-cooling heat sink which reduces the temperature of the cutting head to improve the life of the cutting head.
Clamp Design
It adopts an pneumatic clamp design on both sides and it can modulate the center automatically. The diagonal adjustable range is 20-300mm.
Fractional Automatic Support Installation
It employs intelligent tube support design, which can solve the deformationproblems in the process of long tube cutting.
Full-automatic feeding and unloading material device (optional)
Automatic Feeding
Realize the intelligent material separation, feeding and seamless docking with the fiber laser cutting machine after the whole bundles of tubes are placed in the feeding device, and ensure that only one tube is delivered to the conveying arm each time.
Automatic Unloading
The finished product is automatically dropped to the storage bin, double support-bearing auxiliary support overlong tubes.
Technical Parameters
Machine Model | 60MS |
laser power | 1000W 2000W 3000W 4000W 6000W (Optional) |
Dimensions | 12694*5345*2638mm |
working area | Hold diameter: Φ20mm-Φ300mm |
Repeat positioning accuracy | ±0.02mm/m |
Max speed | 1.5G |
Max acceleration | ±0.02mm/m |
Voltage and frequency | 380V/50Hz/60Hz |
'레이저 가공기' 카테고리의 다른 글
3D 레이저 가공기 (0) | 2020.06.26 |
---|---|
LC 파이버 & CO2 듀얼 레이저 가공기 (0) | 2020.06.26 |
3015 GCR 파이프 & 평판가공기 (0) | 2020.06.26 |
3015 GC 평판가공기 (0) | 2020.06.25 |
3015 GA 평판 가공기 (0) | 2020.06.25 |
댓글